Home > snmp > Get interface input/output rate statistics over SNMP from Huawei switch

Get interface input/output rate statistics over SNMP from Huawei switch

September 5Hits:8
Advertisement

We need to monitor the download/upload bandwidth on interfaces on Huawei S5300 switches, and we need to do it with a specific monitoring system. This system can get information from a switch using SNMP OID and can draw historic graphs based on collected data.

The issue is that there is no standard OID for bandwidth. For instance, the well known IF-MIB and its ifTable (1.3.6.1.2.1.2.2.) can return values for the number of bytes going in/out of the interface (.16-ifOutOctets and .10-ifInOctets) but they aren't useful since they need to be processed in a formula to get the actual bandwidth. The monitoring system we use has not built in option to calculate bandwidth using the information from IF-MIB.

As a solution, we're looking for Huawei custom MIB that can give us data about the current bandwidth usage of an interface. Is there a way to get the "Last 300 seconds input rate" and "Last 300 seconds ourput rate" in bits/sec for Ethernet and GigabitEthernet interface on S5300 switches using SNMP? Practically, we need the MIB and SNMP OID that relates to the input/output rate that is shown using the command: "display interface GigabitEthernet 0/0/X", as shown at the image below:

Get interface input/output rate statistics over SNMP from Huawei switch

Thank you for your attention to this matter.

Related Articles

  • Get interface input/output rate statistics over SNMP from Huawei switch

    Get interface input/output rate statistics over SNMP from Huawei switchSeptember 5

    We need to monitor the download/upload bandwidth on interfaces on Huawei S5300 switches, and we need to do it with a specific monitoring system. This system can get information from a switch using SNMP OID and can draw historic graphs based on collec

  • Input/Output rate for VLANs on Juniper devicesOctober 29

    Scenario: I am passing traffic across multiple VLANs between a Cisco and a Juniper device. On the Cisco device, when I do a sh int ge-x/x/x.xx, it gives the input/output rate on this VLAN (and gives rates on other VLANs, too). When I do the same on a

  • Is an interface's limit independent of input/output?March 23

    Suppose I have a 10 Gbps interface in a router. Does that mean the maximum amount of traffic I can send through the interface will be some combination of input/output rates up to 10 Gbps, or can I have up to 10 Gbps in each direction (input and outpu

  • Showing the current intput/output rate on a cisco deviceOctober 23

    Is there a way to check the current interface output/input rate on Cisco devices? the interface statistics only give the average over 5 minutes, and monitoring the interface seems to have a very long lag (as it also only shows the updated value over

  • Rate limiting the snmp traps using IPTABLE rule in output chainMay 16

    I have a system which is configured as SNMP agent and sends the TRAPS to some other remote m/c which is configured as SNMP manager.Now from this SNMP agent i want tot rate limit the SNMP traps using IPTABLES utility existing in Linux.Instead of writi

  • Set default input/output soundNovember 8

    I have a mac that is hooked into a sound board, I have external sound card that interfaces between the computer and the soundboard, this works great. However, whenever the computer restarts it sets the input & output to the 'internal microphone' and

  • Lots of "Input/output error" after connecting Samsung Galaxy S2 via USBJanuary 11

    I'm trying to connect my Samsung Galaxy S2 (GT-9100, Android 2.3.4, I9100XXKI1) with my Linux box (Ubuntu 11.10 oneiric). I'm using the USB storage mode (Settings ➔ Wireless and network ➔ USB utilities). The device is recognized and two device nodes

  • Is there some dead simple way to record all audio (input+output) on Windows 7?March 12

    I need a very simple app that my non-technical colleagues can use for recording calls made via a VOIP program on their PC. There are many programs that allow recording audio input and/or output - but after a significant time of digging, I couldn't fi

  • Error Number 5: Input/Output Error while installing Linux

    Error Number 5: Input/Output Error while installing LinuxAugust 23

    I have an emachines PC (model T5226) that I am attempting to install Linux on. I have tried multiple distros, namely Sabayon, Linux Mint, and SUSE, but at some point during the copying files phase of the installing, I get an "error number 5: input/ou

  • Applications of DIO (Digital Input Output)

    Applications of DIO (Digital Input Output)January 5

    I am confused about the term DIO (Digital Input Output). What is it, what are its applications? A simple AND gate accepts digital input and provides digital output, how is the AND gate different from DIO? Is there any difference at the output voltage

  • HDPARM Keeps giving Input/Output ErrorAugust 9

    I've been trying to set the password on my Seagate drive: sudo hdparm --user-master m --security-set-pass pwd /dev/sda I get Issuing SECURITY_SET_Pass command, password="pwd", user=master, mode=high SECURITY_SET_PASS: Input/output error Why do I

  • How can we use a usb(in a laptop) for general purpose input/output operations, such as robotics control

    How can we use a usb(in a laptop) for general purpose input/output operations, such as robotics control January 2

    How can we use a usb port (in a laptop) for general purpose input/output operations, such as robotics control?? I want to control an external hardware such as a robot or say simply an array of LEDs using my laptop's USB port. Is there a way to do so.

  • INPUT, OUTPUT or Forward ChainJanuary 8

    I'm using a linux box as a router: The Box has 2 public ips and local ip, i'm using natting to allow local users to access the web. When a local user access the web, source natting happens here, the packets going through the public interface are they

  • tar: /dev/st0: Cannot write: Input/output errorJune 23

    When we attempt to use tar to write data to an LTO-5 tape, we get the following error. The device starts to write, and then fails. See the tar command and output, followed by the dmesg output. I included the mt status as well. Any help is appreciated

  • Ubuntu 14.04 "[Errno 5] Input/output error" during InstallationJuly 23

    I have been trying to install a fresh copy of Ubuntu 14.04 (64 bit version) on my desktop PC from a USB memory stick, but I'm experiencing a problem. Each time I attempt an install I received an "[Errno 5] Input/output error", followed by the fo

  • input/output error at clean ext3 partition - how to check what wrong with data blockAugust 1

    I have a problem with a file at a ext3 partition on CentOS 5 server (kernel version 2.6.18-164.15.1.el5) with a HP Raid Controller: hpacucli ctrl all show detail Smart Array P410 in Slot 1 Bus Interface: PCI ... HP tool doesn't report any problems. I

  • Expectations on input / output of array dimensions and approaches to implement support for variable dimensions input arraysMarch 1

    Preamble As we are vectorising our colour API, we are changing the accepted input types for most of our functions. We would be keen on keeping backward compatibility with the existing code. Let's define the following input variables: numeric R shape:

  • How to interface PWM output from a microcontroller with power MOSFET?April 6

    How to interface PWM output from a dsPIC30F6012 microcontroller with power MOSFET TrenchFET like SiE818DF? I want use PWM to control the brightness of the LEDs. Four PWM channels, one PWM per channel. PWM frequency 244Hz LED Voltage: 12V Total operat

  • How to interpret step-up output current with respect to input/output voltageAugust 15

    I have a Pololu 12V step-up converter (U3V12F12) that I'm powering with a 3.7V 6600mAh lipo battery. The idea was to use it to power a dev board that requires a 12V input. The dev board draws about 250 - 300mA when hooked up to my powerbench @ 12V In

  • Linux Mint FTDI Usb to Serial Input/output errorNovember 16

    I am really frustrated here... My problem is that after some point (at first it worked correctly), a Digi Board I am using (with FTDI chipset) cannot be accessed through the serial (usb to serial) interface. The device is attached at /dev/ttyUSB0. Ev

Copyright (C) 2018 ceus-now.com, All Rights Reserved. webmaster#ceus-now.com 14 q. 0.821 s.