Home > windows server 2003 > NLB Port Rules - Load Weight of 100

NLB Port Rules - Load Weight of 100

June 1Hits:1
Advertisement

NLB allows admins to set up a node to handle 100% of the load for a particular port. If that node fails, will no other nodes handle the request because of the port rule?

Answers

Not necessarily - as long as at least 1 other node in the cluster has a weight greater than 0, that node can take on all traffic for the cluster. If all your nodes have a weight of 0, then traffic for your cluster will indeed stop. A weight of 0 essentially stops that node from taking on any traffic, even in the event of other nodes failing.

The reason this is possible is because the weight does not equal the actual percentage of traffic that node will take. You can set all your nodes to be a weight of 100 if you wish. The actual calculation that determines how much weight a node will take is:

(node weight) / ( sum of all active node weights)

So in a 2 node cluster setup as node1: 100 and node2: 0, general operation will put all traffic to node1, and the failure of node1 will cause a failure of the cluster.

In a 2 node cluster setup as node1: 100 and node2: 50, the general operation will put 66% of the traffic to node1 and 33% to node2. In the event of a failure of node1, 100% of traffic will go to node2, and vice-versa if node2 fails.

Sounds like you want Single Host filtering node. This puts 100% traffic on your chosen server and will failover to the other(s) if it goes down.

Related Articles

  • NLB Port Rules - Load Weight of 100June 1

    NLB allows admins to set up a node to handle 100% of the load for a particular port. If that node fails, will no other nodes handle the request because of the port rule? --------------Solutions------------- Not necessarily - as long as at least 1 oth

  • Windows Server load climbs to 100% - possibly due to php?

    Windows Server load climbs to 100% - possibly due to php?November 5

    For our setup here, we have 2 load-balanced Windows 2003 Servers with PHP using FastCGI & IIS6 that host a multitude of websites -- probably 30 websites or so. The largest website gets about 5000 hits / day (<100 concurrent users) and most of the o

  • Looking for a router with multiple WAN ports and load balancingJanuary 4

    I'm going to be moving in a few months. The location I'm moving to is great except it's on a road with very few people, so the internet access option is limited to DSL at 1.6Mbps down, 384kbps up. This is much slower than I'm used to. One option is t

  • fail2ban block ports rules iptableAugust 20

    I just installed Ubuntu Server 14.04 and don't have much experience with IPtables. I am trying to get a basic setup going where I only accept SSH connections on port 22 and 2222. I actually have that working with no problem using fail2ban ssh. Then I

  • Router limits network performance but its CPU load isn't 100%

    Router limits network performance but its CPU load isn't 100%January 31

    I'm using a PC Engines APU device running FreeBSD as a NAT router. The setup is very usual: one WAN connection and one LAN connection. Theoretically, WAN connection is 800/40 Mbit/s and the LAN one is 1/1 Gbit/s. In practice, the router is connected

  • VServer Apache: Is 5s page load normal for ~100 clients?March 4

    I administrate a virtual server with 16x Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz with a shitload of 32GiB system memory. The server is used as a web server and has 100 to 150 users at rush hour. In these times the server needs around 5 seconds to h

  • loading Data of 100 users using angularJS along with DOM modificationFebruary 2

    I have a data of 100 users and their info along with that i got their images. It is obvious that it will slow down. So I was first getting all the Info of users and then tried getting the images of users. It looks like this is also delayed. so my pla

  • Mysql LOAD DATA INFILE 100,000 csv records perfect BUT 300,000 records - 0 rows insertedFebruary 10

    The following query imports 100,000 perfectly, but larger files nothing happens. No errors, no rows loaded. Any clues you can offer are appreciated. I spent hours looking into max file and memory limits and need help. Thanks! LOAD DATA LOCAL INFILE '

  • Apache loads CPU to 100% on AWS with 5-10 WP visitsJanuary 18

    I have a wordpress few-pages site deployed to AWS t2.medium and with 5-10 simultaneous visits CPU goes to 100%, or when I log in as admin. I tried to disable plugins - didn't help, cache plugin is installed. Running TOP command showed 4 apache httpd

  • Control how requests are distributed on a NLB clusterJanuary 14

    We are testing an application on an NLB cluster. We notice that the requests are not being spread evenly between the servers in the NLB cluster. Is there anyway do configure the requests to be spread evenly between the servers? --------------Solution

  • Advantage of Microsoft Cluster over Microsoft Network Load BalancerJanuary 15

    Till recently, I assumed that Microsoft NLB worked at an OS/Machine level rather than an Application Level. i.e. the NLB just monitors heartbeats on the machine to check if machine is alive and then switches off a particular node if it's gone down. H

  • can one cluster IIS- WAS for TCP/IP clustering or is it HTTP onlyDecember 9

    Does the NLB (network load balancing) feature of IIS extend to an ability to cluster TCP/IP traffic using WAS (Windows Process Activation Service)? I could certainly use HTTP to host WCF services but would prefer the efficiency of a TCP/IP binding. -

  • Does the additional load on UPS in case of grid failure amount to 100%?February 25

    The scenario is as follows: Servers are equipped with two PSU's each. One of these is connected to the UPS, the other one directly to the power grid (bypassing the UPS). I would assume that since the PSU's are redundant, load is more or less evenly d

  • Gnome Update Manager stays at 100 % system load

    Gnome Update Manager stays at 100 % system loadSeptember 19

    I experience a strange behaviour on my Debian (Wheezy x64) every time I use the Gnome Update Manager. While downloading the files, the CPU load stays low. (click for better resolution) When the new packages are unpacked the CPU runs hot. (click for b

  • 100% cpu load on nginx + php-fpm with prestashop 1.5June 14

    Hey guys I managed to set up my VPS (single core, 1 gig ram) with the prestashop guide here on HowtoForge. Everything is working, except for the extremely high CPU load, the frontpage has an OK load time, but the product pages take forever to load, w

  • When using iptables firewall rules, why assert NEW state on all allowed ports?February 27

    I often see iptables configured to allow all pakets to RELATED connections, and the specific service ports to NEW connections. What is the reason for stating NEW? If an connection is not NEW, it is RELATED I guess, so the specific port rule will exec

  • Apache 2.4.9 100% CPU load of random workersApril 9

    I own a t1.micro EC2 instance. After release upgrade of Ubuntu to saucy I got Apache 2.4.6 and I started noticing 100% CPU load like this top - 19:37:58 up 2:55, 2 users, load average: 3.90, 2.90, 1.82 Tasks: 95 total, 4 running, 91 sleeping, 0 stopp

  • How source port field in firewall rule is usedApril 14

    Some firewalls (like the first figure in 13.1.4 in http://doc.m0n0.ch/handbook/examples.html) allow user to specify source port in a firewall rules. But in a TCP connection, the source port is randomly selected from 1024 - MAX. So my question is, why

  • Windows Network Load Balancing not balancing loadSeptember 15

    We have a performance test environment that we built to run load testing on. We have a presentation tier and an application tier each made up of 4 servers, with a sql server feeding these. We are using Windows Load Balancing on Windows 2003 Server (E

  • Network Load Balancing problemMay 27

    Summary I have two machines in an NLB cluster. If I shut-down one machine (to simulate failure) then the second doesn't take-up the load. I'm looking for help in diagnosing the reason for this. Details I have built a test/staging system consisting of

Copyright (C) 2017 ceus-now.com, All Rights Reserved. webmaster#ceus-now.com 14 q. 0.848 s.