Home > tikz pgf > tikz graphs: draw an edge from a node without a goal node

tikz graphs: draw an edge from a node without a goal node

December 4Hits:2
Advertisement

Is it possible to write an edge going from a node but out into nowhere, see image below (ignore the trace of goal node that is visible)

tikz graphs: draw an edge from a node without a goal node

Answers

Something like \draw[->] (node) --++(0:2cm) node[above,midway]{0}; or \draw[->] (node) --++(2cm,0) node[above,midway]{0}; ?

For automata drawings, you can also use the tikz library automata.

It doesn't really bring anything new for your example, but if you try to extend it to a real automaton, it may prove easier to use that syntax.

\documentclass{article}

\usepackage{tikz}
\usetikzlibrary{automata}

\begin{document}

\begin{tikzpicture}
  \node[state,initial by arrow, initial text={}] (s) {$b_{0}b_{1}$};
  \path[->] (s) edge[loop above] node {1} ();
  \path[->] (s) edge node[above] {0} +(1,0);
\end{tikzpicture}

\end{document}

Note that if you don't need the label above the right arrow, you can use a similar syntax to initial..., that is :

accepting by arrow, accepting text={}

tikz graphs: draw an edge from a node without a goal node

Related Articles

  • tikz graphs: draw an edge from a node without a goal node

    tikz graphs: draw an edge from a node without a goal nodeDecember 4

    Is it possible to write an edge going from a node but out into nowhere, see image below (ignore the trace of goal node that is visible) --------------Solutions------------- Something like \draw[->] (node) --++(0:2cm) node[above,midway]{0}; or \draw[-

  • How to increase the distance between nodes and node orientation with TikZ graph drawing library

    How to increase the distance between nodes and node orientation with TikZ graph drawing libraryJanuary 20

    I am creating a graph using TikZ (it is in ConTeXt, but the idea should be the same in LaTeX): \usemodule[tikz] \usetikzlibrary[graphs, graphdrawing] \usegdlibrary[layered] \defineframed[fixed][width=5mm,height=5mm, frame=off] \starttext \tikz \graph

  • TikZ graph drawing: edge option conflicts with chain group

    TikZ graph drawing: edge option conflicts with chain groupJanuary 6

    I thought that the following two graphs are the same. \documentclass[tikz]{standalone} \usetikzlibrary{graphs} \begin{document} \tikz\graph{1--{2,3}}; \tikz\graph{1--[]{2,3}}; \end{document} But they result and . It is supposed to be so? I found this

  • TikZ graphs: Specify edge target anchor

    TikZ graphs: Specify edge target anchorFebruary 6

    I have the following code: \documentclass[tikz]{standalone} \usetikzlibrary{graphs} \begin{document} \tikz \graph[grow right sep=20,nodes={draw,rectangle}] { a -> {b, long node name} }; \end{document} Which produces this output: I'd like to have the

  • Tikz Graph Example – all nodes stacked

    Tikz Graph Example – all nodes stackedAugust 27

    I try to reproduce the \graph example of the pgf manual 2.10 page 208: \documentclass{article} \usepackage{tikz} \usetikzlibrary{graphs} \begin{document} \tikz \graph {a -> { b , c } -> d}; \pgfversion \end{document} All nodes (a, b, c, d) are place

  • Showing weights on Tikz graph using "draw edge" commands

    Showing weights on Tikz graph using "draw edge" commandsMarch 17

    I would like to show some numbers as weights of the edges of my Tikz graph. My graph without weights is the following: \begin{figure}[!ht] \begin{tikzpicture}[shorten >=1pt, auto, node distance=3cm, ultra thick] \tikzstyle{node_style} = [circle,draw=

  • TikZ/pgf: When using the `graphdrawing` library, can I draw an edge from a node, to the "edge node" of an edge?

    TikZ/pgf: When using the `graphdrawing` library, can I draw an edge from a node, to the "edge node" of an edge?May 20

    Here's the working example I have been playing with: \documentclass{standalone} %====================================== \usepackage{tikz} \usetikzlibrary{graphdrawing} \usetikzlibrary{arrows} \usetikzlibrary{graphs} \usegdlibrary{force, layered, tree

  • How to nest a graph within a node in TikZ and draw edges between the graphs?

    How to nest a graph within a node in TikZ and draw edges between the graphs?September 7

    I'm trying to draw a graph and have a separate graph within one of the outer nodes. I seen this question, but I don't understand how the matrix nodes will help me. I would also like to draw edges between the outer nodes to the inner nodes. Could some

  • Line break in edge labels in tikz graphJanuary 5

    I'm using tikz and pgf to draw state machines in a document, and I'd like to be able to have a multiline edge label between two nodes. Something like the following would be ideal: \begin{center} \begin{tikzpicture}[node distance=2.5cm,auto] \node[sta

  • Tikz graph: weight above the node

    Tikz graph: weight above the nodeOctober 14

    Hy, I would like to know if it is possible in Tikz graphs put the weight above the vertice (this way, all edges to the destination node has the same weight) instead above the edge. Here is an example: --------------Solutions------------- A simple sol

  • Beamer: problematic use of \visible and \only in combination with TikZ to draw a graph

    Beamer: problematic use of \visible and \only in combination with TikZ to draw a graphFebruary 20

    I have a problem with my graph and my background environment to highlight the edges in the "last" of my slides. First I tried this: \begin{frame} \frametitle{Graphmodell Beispiel} \tikzstyle{vertex}=[circle,fill=white!25,minimum size=20pt,inner

  • TikZ/pgf: How to draw edges that start and end at the same node when using the `graphdrawing` library?

    TikZ/pgf: How to draw edges that start and end at the same node when using the `graphdrawing` library?May 19

    I have borrowed this example from http://www.texample.net/. The graph exhibits a characteristic that I do not know how to reproduce using the graphdrawing library: its nodes have edges that start and end at the same node. How would this be done when

  • Drawing a ring of cliques in tikz-graphs

    Drawing a ring of cliques in tikz-graphsJanuary 19

    I'm about to draw a ring of cliques graph, with a custom number of nodes in the cliques and a custom number of cliques. My first solution is to use tikz-graphs to draw the cliques, but the problem is how to tile the cliques with rotation around a cen

  • Edge weights with TikZ graphs

    Edge weights with TikZ graphsJune 7

    I am using TikZ to draw graph, and want to add edge weights. I have seen some successful example like this. However, when I try to do the same thing, it doesn't work. Could anyone know the reason? Much indebted! The following is my current code: \doc

  • Any way to get neato-like node placement in a TikZ graph?

    Any way to get neato-like node placement in a TikZ graph?February 8

    I'm interested in drawing molecular connectivity graphs in TikZ. Using \node and child without any positions I am able to draw a tree diagram which is semi-useful as I can easily illustrate the hierarchical relationships of the implied z-matrix. Here

  • Tikz Graph with Nodes and Edges and some Dots

    Tikz Graph with Nodes and Edges and some DotsOctober 11

    I want to draw an image like this with TIKZ. I want to convert the Squares to rectangles, thus I am using Tikz. However, I am unable to draw those dots in TIKZ. Here is the code that I have written. \begin{tikzpicture}[% ->, >=stealth', shorten >

  • How to draw rectangle edge label in tikz?

    How to draw rectangle edge label in tikz?June 30

    I want to draw something like this. How to get that rectangle edge label? This is the MWE. \documentclass{article} \usepackage{tikz} \usepackage[margin=15mm]{geometry} \usepackage{calc} \usetikzlibrary{matrix,arrows} \usetikzlibrary{positioning,arrow

  • TikZ edge between multiple source nodes and single target node

    TikZ edge between multiple source nodes and single target nodeAugust 16

    I'm trying to achieve something like the following: (Please ignore the node styles, I've sorted that part, it's the edges I'm struggling with!) My diagrams can have undirected edges that join arbitrary sets of nodes together; I use small perpendicula

  • Use same label for different nodes in tikz graph

    Use same label for different nodes in tikz graphMay 12

    I'm using section 5 "Tutorial: Diagrams as Simple Graphs" of the TikZ manual to draw syntax diagrams in LaTeX. One issue I'm facing however, is that I want to use the same label for different nodes, but the rendered image always has the arrows p

  • Help with Tikz to draw graphs with squiggly edges

    Help with Tikz to draw graphs with squiggly edgesJuly 1

    In my work there are case analysis of graphs of the type: I am new to the wonderful world of TikZ and I have tried the following: \begin{tikzpicture}[every node/.style={circle, draw, scale=.6}, scale=.5, rotate = 180, xscale = -1] \node [draw,shape=c

Copyright (C) 2018 ceus-now.com, All Rights Reserved. webmaster#ceus-now.com 14 q. 0.596 s.