Home > linux > Virsh can't connect to ovirt hypervisor

Virsh can't connect to ovirt hypervisor

May 12Hits:4
Advertisement

I installed Ovirt and want to add network interface for NAT. So I need to connect to hypervisor by virsh and add nic.

Ovirt installed on my local server, host (ovirt-engine.kvmserver.net) is on the same server.

I tried to connect in readable mode is ok

 # virsh -r Welcome to virsh, the virtualization interactive terminal.  Type:  'help' for help with commands        'quit' to quit  virsh > list  Id    Name                           State ----------------------------------------------------  10    CentOS_test                    running  12    CentOS_test2                   running  16    Windows1                       running  17    Windows2                       running 

In normal mode

# virsh Welcome to virsh, the virtualization interactive terminal.  Type:  'help' for help with commands        'quit' to quit  virsh # list Please enter your authentication name: Please enter your password: error: Failed to reconnect to the hypervisor error: no valid connection error: authentication failed: Failed to step SASL negotiation: -1 (SASL(-1): generic failure: All-whitespace username.) 

As I understand I need to connect with certificate. I tried on https

# virsh connect https://ovirt-engine.kvmserver.net 2013-05-12 13:21:30.004+0000: 25581: info : libvirt version: 0.10.2, package: 18.el6_4.4 (CentOS BuildSystem <http://bugs.centos.org>, 2013-04-18-16:13:45, c6b7.bsys.dev.centos.org) 2013-05-12 13:21:30.004+0000: 25581: warning : virNetTLSContextCheckCertificate:1102 : Certificate check failed Certificate [session] owner does not match the hostname ovirt-engine.kvmserver.net error: Failed to connect to the hypervisor error: authentication failed: Failed to verify peer's certificate 

I tried on port 80

# virsh connect http://ovirt-engine.kvmserver.net:80 error: Failed to connect to the hypervisor error: authentication failed: TLS handshake failed A TLS packet with unexpected length was received. 

How I should to connect to hypervisor?

Answers

I found the solution!

The problem was on "Remote management using SASL authentication". I didn't create special user for SASL. Create user command is

# saslpasswd2 -a libvirt USERNAME
Password:
Again (for verification):

That's all.

Certificates don't match. If virsh has an option to not check validity of cert then use that option. Otherwise, fix the cert to match the dns name or vice versa, fix dns to match the cert name. Whichever is more appropriate.

While you can probably google or ask for the username and password in [email protected], I would definitely advise against touching anything with virsh. The reason is that ovirt-engine manages the system, issuing commands to the underlying vdsm and libvirt daemons, and if you go directly to libvirt, bypassing the engine, any changes you make will not be accounted for and can potentially break things.

Moreover NAT configs are not natively supported by ovirt, the standard operational mode is bridged, which is what the ovirt logical networks really are under the hood.

Related Articles

  • Virsh can't connect to ovirt hypervisorMay 12

    I installed Ovirt and want to add network interface for NAT. So I need to connect to hypervisor by virsh and add nic. Ovirt installed on my local server, host (ovirt-engine.kvmserver.net) is on the same server. I tried to connect in readable mode is

  • qemu-kvm/virsh: No network connectivity whilst using bridged networkingNovember 21

    I'm having an issue with performing virtualisation via libvirt/qemu-kvm, in which my set up for bridged networking doesn't appear to be working correctly. I've followed every tutorial I can find and spent hours and hours going through forums, but cur

  • Unable to bridge network connection to any hypervisorOctober 23

    I have a Virtual-PC hard drive that I need to run with bridged networking so that it gets an IP address on the same network the host OS is running on. However, on this particular computer, I am finding that to be impossible. Host OS OS: Windows 7 Ent

  • Can XenCenter connect to xen-hypervisor-amd64January 9

    I have installed XenServer recently, but didn't stick with it. I am familiar with Ubuntu and was reading you can install XenHypervisor as a standalone package inside a Ubuntu OS. Kind of like installing Hyper-V on windows server instead of installing

  • MAAS, JUJU, VirtualBox 4.3 and virsh commandMay 19

    I've a problem with libvirt 1.2.2 and VirtualBox 4.3. After installing Ubuntu 14.04 server and setting MAAS and JUJU, I need to use virsh to see the list of my installed VM (as reported in the guide How to configure MAAS to be able to boot virtual ma

  • Connecting to KVM VM via VNC August 2

    I just installed KVM on centos 6.5 and after I created a VM I don't know how to access via VNC. I used this command to create the VM: virt-install --name=guest_name --arch=x86_64 --vcpus=2 --ram=5120 --os-type=linux --os-variant=rhel5 --hvm --connect

  • Gentoo virt-manager on system without GNOME cannot connect to libvirtd due to polkit throwing a missing file errorAugust 3

    I am running Gentoo Linux for AMD64 using kernel 3.12.21 AMD64 on an HP Pavilion Touch 14-N009LA with an AMD A8-4555M CPU. My desktop environment is KDE 4.12.5. I have installed KVM, libvirtd, polkit and virt-manager. However, when I open virt-manage

  • virsh/libcurl doesn't reference imported Root CA certificateNovember 10

    I'm running Ubuntu Server 14.04 and I'm trying to connect to an ESXi host that has a signed certificate signed by my internal CA. Here is the error message seen when connecting: [email protected]:~# virsh -c esx://[email protected] list --all error: failed to

  • virsh console and tty sizeDecember 20

    I have a virtualization server to which I connect over ssh. If I now change the size of the window it will automatically propagate to the server. It's most easily seen using stty -a, checking the columns and row values. I then use virsh console to co

  • VMware vSphere Hypervisor IP questionJune 26

    I have a VMware vSphere Hypervisor server with two virtual machines running ubuntu, they are just test machines while I learn more about virtualisation and servers in general. I would like the virtual machines to be accessible from the outside world

  • KVM on Ubuntu: console connection displays nothingDecember 7

    I've created a KVM virtual machine using the following command: sudo ubuntu-vm-builder kvm oneiric \ --domain xpstage \ --dest xpstage \ --arch i386 \ --hostname xpstage \ --mem 1024 \ --user myuser --pass mypassword \ --bridge virbr0 \ --ip 192.168.

  • CentOS 6.5 Xen Virtual Machine Issue 'this function is not supported by the connection driver'December 12

    I am trying to segment my system into a number of virtual machines but just cant seem to get this to work. I think I am close but not quite there. I have install xen, virsh, xl etc and I am using virsh to try and create a new VM. virt-install --virt-

  • non-GUI connection to local Hyper-V VM without networkJune 4

    I have a virtual machine on Hyper-V manager (Windows 2008 R2) without a network configured on the VM. From a powershell script running on the host Windows server, I would like to query into the OS of that local VM for certain information (i.e. if a g

  • Error on nova-compute strart - libvirt: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directoryMarch 23

    Any attempt to start nova compute services fails with the error HypervisorUnavailable: Connection to the hypervisor is broken on host: The trace log is the following (taken from /var/log/nova/nova-compute.log ) AUDIT nova.service [-] Starting compute

  • Hyperbox fail to run hypervisor

    Hyperbox fail to run hypervisorMay 11

    I could not start the hypervisor in my Hyperbox client regardless what type of Connector ID that I used. The status will also fail. I have tried using the portable version and the installer version for the server but the client just could not connect

  • Remote desktop connection to kvm virtual machine starts working after vnc-logon?August 4

    I am running a Windows XP on kvm inside my debian system. Everything runs smoothly and I can connect via VNC as well as via Remote Desktop. VNC connection is naturally supported right from boot up and always works for me. For Remote Desktop I have to

  • libvirt + ESX (HTTP response code 400 for call to 'Login')February 28

    I'm trying to connect to a vSphere cluster using the information from the libvirt documentation. $ virsh -c "vpx://[email protected]/dc1/dc1-cluster-e01/dc1-vsphere-e04/?no_verify=1" Enter root's password for 10.51.4.11: error: internal error HTTP

  • ubuntu 12.04LTS libvirt no conenction driver availableJanuary 17

    I am trying to setup a vm using xen under ubuntu 12.04LTS. I have installed the default libvirt version but I have some errors when trying to run: $ virsh -c <uri> list the errors are: error: no connection driver available for No connection for URI

  • Install KVM on Ubuntu 13.10 serverNovember 11

    How do I install/enable KVM on Ubuntu 13.10 server? I executed the following steps egrep -c '(svm|vmx)' /proc/cpuinfo sudo apt-get install qemu-kvm libvirt-bin bridge-utils virt-manager sudo adduser test1 libvirtd Did not get any installation issue.

  • Accessing VirtualBox with libvirt from a guestJune 11

    I have installed libvirt on OSX, and from outside a virtualbox I can access it using virsh no problem. However, I want to access it from inside a guest, and this is giving me the hopelessly useless error: [[email protected] ~]# virsh -c vbox://192.168.5

Copyright (C) 2017 ceus-now.com, All Rights Reserved. webmaster#ceus-now.com 14 q. 0.299 s.